- Width: 18"
- Length: 54"
- Thickness: 2"
- Fire Rating: California Technical Bulletin #117 Section E
- Features: Durable, high density foam suitable for long-term use.
Density: 2.4 lbs Per Cubic Foot
This 2" high density foam (2x18x54) provides two inches of thickness to cover bar stools, benches and small ottomans. Upholstering the top of a child's toy chest will provide a comfy spot to sit and read or tie their shoes. The 18 inch width is just the right size to create throw pillows for your sofa and chairs. One piece of this 2 inch foam provides enough filling for 3 pillows.
Q & A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions
Browse 6 questions
and 35 answers
Why did you choose this?
Does this have chemical flame retardants?
BEST ANSWER: It does not.
Is an electric carving knife the best tool to use to trim this foam to size?
BEST ANSWER: A serrated knife will work just fine to trim this foam! Just mark on both sides where you want the cut to be, cut halfway down on one side, flip the foam over, and cut through to the other side.
how much form do I need for a sofa pillow 24 inches square?
BEST ANSWER: This foam comes in 24 inch widths and 54 or 108 inch lengths. If you need 1 or 2 cushions, get the 54 inch length. If you need 3 or 4, get the 108 inch length. Sofa cushions are typically 5 or 6 inches thick.
I am covering 6 dinning chairs 22" X 22 how much foam do I need and what density? They are used a lot.
BEST ANSWER: You will need 3 pieces of the high density 2" x 24" x 54" foam. Or one piece of that size and one piece of the 2" x 24" x 108" foam.
I am recovering six 18"x20" dining room chairs, so I need I need 2.23 pieces of this.
•Can I buy 2.23 pieces only instead of 3 pieces?
•Would your company send the 2.23 pieces in six exact (or as close to even) pieces, if I requested?
BEST ANSWER: We do not currently offer custom cuts for foam. You would need to purchase 3 pieces.
I was skeptical since I wasn’t able to feel this before hand but the foam is great. Nice and dense, clean and no terrible smell. Works wonderfully for the dining room chairs I’m doing.
August 25, 2018
4 months ago
Very good quality foam
I used the 2" hi density foam to make seats for dining room chairs that I built. I covered them in high quality vinyl and they turned out great! The foam is just the right density for this use..
September 16, 2018
3 months ago