60 Gauge Clear Vinyl
- Product ID: P600100C P600100C
- Content: 100% Polyvinyl Chloride
- Width: 48"
- Thickness: 0.060" (±5%)
Cold Crack: -10 Degrees
WARNING: View Prop. 65 info
- Features: Double Polished
- Please Note: This clear vinyl is a general purpose product. Waves and slight distortions may be present as a result of the manufacturing process, but are not considered to be defects.
Maximum Continuous Length: Approximately 11 Yards,
when ordering more than 11 Yards please note it may come in more than one piece.
60 Gauge Clear Vinyl is our thickest clear vinyl, making it extremely durable and heavy duty. Common uses include table top protection, pet doors, and boat windows. It holds up well to harsh weather and cold temperatures.
Q & A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 61 questions
Browse 61 questions
and 118 answers
Why did you choose this?
Want to use this as a dresser top and wood shelf protector (from kids toys etc). Any issues with moisture forming between the vinyl and finish of furniture that would damage the furniture?
BEST ANSWER: That is what we used it for and no problems to date.
What is the thickest gauge? And is it sturdy or floppy plastic sheets
BEST ANSWER: This 60 gauge clear vinyl is the thickest gauge. It is quite sturdy. We recommend ordering a sample to see if it will work for you.
I want to use this on my table. Is it slick? I will cut it to the shape of the table. Will it slide around?
BEST ANSWER: It depends on what the table is made out of. It sticks to glass well, but it would most likely slide around on other surfaces. You can always order a sample to get a better idea if it would work for you.
Hello can you use this item as a temporary convertible plastic back window?
BEST ANSWER: it is thick and cuts better with a box cutter-i believe it would work for a convertible back window
? In Va in the Winter time I make my back porch into a green house with heaters the 40 gauge and 60 gauge which one will keep the cold out and heat in
BEST ANSWER: Either one would work. The 40 gauge has a lower cold crack temperature, but the temperature shouldn't be an issue for the way you're using it. The 60 would be a little better at insulating, just because it's thicker.
would a poodle be able claw through this if I used it as a door protector?
BEST ANSWER: It's pretty thick so it should hold up well, even to sharp claws! If you want to see how thick it is, you can also order a sample.
what gauge for a doggie door?
BEST ANSWER: It really depends on personal preference. The thicker the gauge the better for a doggy door, we recommend ordering a few different samples to see the thicknesses for yourself.
If I order 3 yards will it come cut into 3 yards or will it be a roll?
BEST ANSWER: It should be 1 continuous piece. Vinyl is shipped on a roll to prevent folds or creases.
Can I put grommets in this like a shower curtain? Or can I glue this back to itself(like making a hem) so I can slide it onto a curtain rod?
BEST ANSWER: I think it would be hard to put grommets on it as it’s pretty thick. You probably won’t be able to flexibly use it as a shower curtain either even if you can grommet or glue it. The quality is amazing though - heavy and durable but it’s also the reason why I don’t think 60 gauge is suitable for a shower.
I’ve been using it on my dining table for more than a year and it still looks as if it’s brand new.
WHICH GAUGE CAN BE USED FOR OVERLAPPING DOGHOUSE DOOR?
BEST ANSWER: I used this 60 gauge vinyl for overlapping doors for a calf hutch (2 ft x 3 ft opening) and also a pig barn opening (5 ft high x 6 ft wide). I cut the sheet into strips of about 8 inch widths and then overlapped each strip halfway with the previous strip and halfway with the following strip to get 100% overlap which gives a double layer. I sandwiched the top ends of the vertical vinyl overlapping strips between two boards to suspend it and then put a screw through the wood for each strip. Because of the length of each strip in the pig barn, they can blow open in very strong winds but under most weather conditions they are perfect. They worked well on the calf hutch. The material is very thick but easily cuts with a utility knife/razor blade. They resist the weather pretty well but i’ve replaced a few strips due to tearing after several years of rough usage. I think they would be great for dog house doors and other uses.
Which gauge size is reccomended to protect a wooden kitchen table?
BEST ANSWER: If it's not meant to drape over the sides like a tablecloth, 40 or 60 gauge works weill.
Will this product emit chemical odor into air? I need to cover carpeting around portable floor ac in bedroom.
BEST ANSWER: I have never noticed any odor at all. This is a good product.
I want to roll this into a tube about 8" wide x 3-4 feet long. Is it thick enough to stand up by itself?
BEST ANSWER: Yes it is, especially is you roll it.
Will 60 ga clear vinyl work to insert over screen on porch for winter?
BEST ANSWER: I believe it would, but also I think it depends on your geographic location. In the southern most areas, there is little to no possibility of freezing weather. In the northern climates, I am not sure if the cold would effect the pliability of this product. I do highly recommend this product .
Could be used as a protective covering for a overlarge watercolor painting? The painting is 14 feet long. I need something as clear and strong as plexiglas but easier storage.
BEST ANSWER: I believe so. It's flexible, it won't rip, but it can be cut with strong scissors. I'm using it as a table cover so I won't damage my table while doing any projects. I'd say I'd recommend it.
I want to use this as a go kart windshield would it work for this?
BEST ANSWER: Sure. We recommend ordering a sample to be sure that it will work for your project.
How thick is 60 gauge in inches ?
BEST ANSWER: it is 0.060" (±5%)
Do you have Vinyl Fuse Iron on 18 inch by 18 inch clear gloss?
Whitehead is thicker 16 ha or10 ga vinyl ?
BEST ANSWER: The higher the gauge, the thicker the vinyl.
What is the width of the plastic?
Does this have an adhesive side? Or do you offer a vinyl product like this that has an adhesive on one side?
BEST ANSWER: This vinyl does not have an adhesive side. We do not currently offer vinyl with an adhesive backing.
How much can I bend the 60 Gauge Vinyl? I am trying to make holes covers for a Skee-Ball Game this would work perfectly because it can bend so easily. Will this thick bend in 2" rings or even smaller? What is the elasticity of the iterm? Thank you for whoever can help.
BEST ANSWER: There is no elasticity for this item. Since your use is a bit uncommon, we suggest ordering several samples in different gauges, that way you can determine which gauge is the best thickness. If it were up to me, I think that 60 Gauge would be too stiff.
What is the weight in lbs of the 60 gauge clear vinyl per square foot?
BEST ANSWER: 4.80 lbs. / yd.
Can I get 30 gauge vinyl in 4foot by 100foot sheets?
BEST ANSWER: You would need to order 34 yards, however this 60 gauge vinyl is only available in 11 yard rolls and the 30 gauge clear vinyl is available in 19 yard rolls. We may be able to custom order for you but you'd need to contact customer service.
I only need a square foot (actually less) for a pet door... do I have to buy a whole yard of 48" wide sheet (12 sq feet)?
BEST ANSWER: Sorry, the minimum order in 1 yard.
I need 10 ft by 5 ft in 60 gauge, how can i order it all in one piece?
BEST ANSWER: Sorry, this 60 gauge vinyl only comes in 48" widths.
Which gauge is the best wo winterize a screened in porch?
is 60 gauge good for flooring cover and support wheeled desk chair?
BEST ANSWER: We don't recommend walking on this vinyl, but it might work as a carpet protector underneath a wheeled chair.
I'm looking for a cover 91x21". Can you custom cut to this size?
BEST ANSWER: We do not offer custom cuts.
how well does it take grommets?
BEST ANSWER: While I have not used grommets in 60 gauge vinyl, I have made holes for screws. The plastic does not rip and has remained intact, with the screws, for a few years now.
Sturdy and sun proof
I used this on both sides of an opening for a doggy door for my large dogs. It is sturdy and keeps the temperature in the garage much more comfortable.
September 16, 2016
over 3 years ago
Used it to protect top of hutch by door. Doing a great job.
November 9, 2017
over 2 years ago
Great product, would now use this site for all my future needs
November 9, 2017
over 2 years ago
Good product, very slow shipping
The product is great, but it took so long to get here that we ended up going another direction and did not use it
July 17, 2018
1 year ago
Used this to make replacement flaps for my custom sized dog door, worked great!
July 15, 2019
4 months ago
Perfect doghouse door
Purchased to use as a door on doghouses...Thick, durable, & exactly what I needed.
December 30, 2018
10 months ago
I was charged a fair price for a good product that I couldn’t find locally. I will go to online first next time
June 10, 2019
5 months ago
Ok but would’ve liked a little thicker
March 15, 2019
7 months ago
really great product in terms of durability and clarity. the only issue I had was getting it to lay flat; it comes shipped in a roll, and it is very difficult to keep the edges from curling. I had to sandwich the piece I used (2' X 3') in between waxed solid steel plates and heat it up, and even after letting it sit for a few days under 100 lbs, it still wants to curl up at the edges.
November 18, 2018
1 year ago