How to Make Reusable Un-Paper Towels

Are you looking for ways to cut down on waste? Here’s a great alternative to traditional paper towels that can be used again and again for years!




Step 1: Cut the fabric

Use a piece of paper as a guide.

Pre-wash your fabric so it doesn’t shrink. Layer the cotton and terrycloth. Cut panels of that are 8.5”x11.”  Make as many as you want, each individual towel will be one piece of terrycloth and cotton.  Cut 1 inch squares of interfacing. You will need 4 of these per towel so just make a bunch.

Step 2: Attach the interfacing

Place the interfacing on the backside of the cotton, in between the print and the terrycloth, about a half an inch from each corner. Iron it in place.

Step 3: Pin together

Pin each piece with the wrong sides together.

Step 4: Sew together

Sew around the edges of each towel. I am using a serger sewing machine, but if you don’t have one just get as close to the edge as you can with a zig-zag stitch.

Step 4: Attach the snaps

Mark 1” in from each corner. Attach two female snaps on the right-hand of the long side using a set of snap pliers. Attach the male half on the left hand of the long side. See our how to attach snaps tutorial for details. Do this to every towel.

Step 5: Roll and snap

Lay out the towels in a row and attach the snaps. Roll the towels starting at one end, I attached the end of mine to a thick cardboard roll with snap. Once it is completely rolled up its ready to be used. And now your un-paper towel roll is complete.

Shop Cotton Print Fabrics!

Q & A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!