Phifertex PVC Wicker Weaves - Veranda Nutmeg Fabric
- Product ID: 3025672
- Manufacturer: Phifertex
- Content: 100% Polyvinyl Chloride Coated Polyester
- Width: 54"
Construction: 25 x 20
- Features: Slingable, Mildew & Fade Resistant, Lead Free - Reach (EC 1907/2006) Compliant, Phifertex fabrics are infused with Microban, an antimicrobial protection which helps prevent the growth of stain and odor-causing bacteria.
- Care: Prepare cleaning solution using 1 tbsp. liquid dish detergent and 2 tbsp. household bleach mixed in a gallon of water. Clean fabric using sponge or soft cloth dipped in solution. Rinse thoroughly with clean water and air dry. Avoid direct contact with oil based products, if direct contact occurs, clean promptly. Regular maintenance of your Phifertex fabric will ensure an extended life of the fabric. It is recommended to clean the fabric once or twice yearly for moderate use, or more for heavy-use applications.
Maximum Continuous Length: Approximately 30 Yards,
when ordering more than 30 Yards please note it may come in more than one piece.
PVC Wicker Weaves - Veranda Nutmeg by Phifertex is a pretty vinyl upholstery décor fabric. This outdoor fabric can be used for projects like arm chairs, headboards, throw pillows, and more. Colors include tan, brown, natural.
Q & A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 12 questions
Browse 12 questions
and 30 answers
Why did you choose this?
I need to replace the front of my outdoor bar and thought this product would work well. What adhesive do you recommend to attach to upright supports?
BEST ANSWER: This adhesive should work:
I'm replacing the fabric in 4 patio sling chairs. The currently installed fabric area for each chair is roughly 20" wide and 40" long (seat and back area). How much fabric will I need? Thanks.
BEST ANSWER: You will need 3 yards total.
Is this waterproof?
BEST ANSWER: No, it is not waterproof. Water will not "puddle up" on the fabric because of the weave. That is why I liked it in case of rain. The water will go right thru and dry off quicker. This particular pattern made up beautifully.
Is suntan lotion considered oil? I would like to use this for chaise lounges. Is it appropriate for that or is suntan lotion bad for it? and can it take Texas sun?
BEST ANSWER: I used this fabric to re-do a porch swing and it still looks like new. I can't imagine any oil would bother it in the least, as it is made for the outdoors. I cannot answer about your "Texas sun" because I live in the Northeast. I hope this helps!
how much fabric would I need for a basic lounge chair?
BEST ANSWER: The chairs we have done for customers have needed approximately 3/4 yard each. But my experience tells me nothing is basic or standard! For the width, measure the visible fabric & then add 4" to that measurement to allow for stitching the channel on each side (2" per side). This fabric is 54" wide so as long as the length + 2 " doesn's exceed that, you are fine.
Do you sell less than a yard of material? I measured my chairs and I will need 1 yard and 4 inches,
BEST ANSWER: We only sell this fabric in full yard increments.
have 3 chair seats to replace each chair is 18 x 20 inches.How much material do I need?
BEST ANSWER: You may be able to squeeze them out of one yard, but only if the pieces are exactly 18 x 20 inches. If you need any extra for installing the fabric, you would need 2 yards.
Seat on patio chair has a hole...can I glue this on top to buy my a year? Coushins go on top
BEST ANSWER: We don't see why not.
I want to sew a fitted tablecloth. Would this fabric work for that?
BEST ANSWER: This fabric is stiff and doesn't drape well. It's possible it could work for a fitted tablecloth, but it may still be too stiff. We recommend ordering a sample to be able to judge if it will work for your particular project.
I have 6 high patio chair with 20 inch width. I need to replace for back and seat for all of them. Do they come pre-sewed so that I can just slide it back ?
BEST ANSWER: You'd need to refer to an owners manual, a re-upholsterer, or YouTube for specific instructions on how to replace the fabric on your chair. This fabric is 54" wide so you'd need to cut it to size.
Can it glued to wood ?
BEST ANSWER: I used this to make new sling seats for my porch swing. It is sturdy and worked well for this application. If your intention is for the fabric to support weight, it will, but I am not certain it would hold well if you glued it. I wish you luck with your project!
Patio Chair Sling Mesh Replacement
This product was a perfect match for my mesh sling chairs. The material is even a little thicker that the original. Very pleased!
September 2, 2017
1 year ago
VERY GOOD MATERIAL EASY TO WORK WITH
June 29, 2018
8 months ago
deck lounge chair replacement
used the fabric to replace a broken lounge chair.
It worked great. Does not stretch much, but a little, easy to handle. Looks durable.
May 7, 2018
9 months ago