Premier Prints Outdoor Stripe Oxford Fabric
- Product ID: STRPOXF-OD STRPOXF-OD
- Manufacturer: Premier Prints
- Content: 100% Spun Polyester
- Width: 54"
- Horizontal Repeat: 4"
- Country of Origin: USA
- Durability: 15,000 Double Rubs
- Finish: Durable Water Repellent
- Fire Rating: California Technical Bulletin #117 Section E
Color Fastness: 500 Hours
Weight: 7 Oz Per Square Yard
- Care: Use cold water and mild detergent. Drying is not recommended, air dry only.
Maximum Continuous Length: Approximately 30 Yards,
when ordering more than 30 Yards please note it may come in more than one piece.
Outdoor Stripe Oxford by Premier Prints is a beautiful stripe upholstery décor fabric. This water repellent & resistant outdoor fabric can be used for projects like arm chairs, headboards, throw pillows, and more. Colors include blue, white.
Q & A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions
Browse 6 questions
and 11 answers
Why did you choose this?
Is the white a pure white or is it an off white?
BEST ANSWER: The white is a pure bright white.
Does it fade?
BEST ANSWER: Since this is an outdoor fabric, it is fade resistant, but it will still slowly fade over time, especially if left in direct sunlight frequently.
Is this a vertical or horizontal fabric. Also is it appropriate for upholstry for my indoor couches.?
BEST ANSWER: The stripes are vertical (parallel to the selvage edges). This outdoor fabric can absolutely be used on indoor furniture, but just be aware that it's a little stiffer than typical indoor fabric. With 15,000 double rubs, this fabric is suitable for most upholstery applications. See this article for more information:
i'd like to make sturdy tote bags with - so I'm curious about the weight of this fabric?
BEST ANSWER: This is a medium weight fabric that's heavier than a quilting weight fabric, but not as heavy as an upholstery fabric. It would work well for totes. We recommend ordering a sample to be sure that it will work for your project. If you need it to be stiffer, you could add an interfacing or stabilizer, like Pellon #809 Decor Bond Fusible Stabilizer.
I'm a bit new to this. How wide is each stripe? Do the stripes run the width of the fabric or the length?
BEST ANSWER: Each stripe is 2 inches wide. (Look at the repeat measurement to get a sense of scale. This measures the distance before the pattern starts repeating itself. With a this stripe the 4 inch horizontal repeat includes one navy stripe and one white stripe, making each stripe 2 inches.) The strips run the length, so in the photo, the selvedge edges would be on the left and right sides of the image.
Strong enough for ding room chair upholstery. High quality look!
I used this fabric to reupholster my dining room chairs and love the nautical look the fabric brings about. I am concerned about stains and so far no spills have happened, but I may add plastic over the fabric just in case.
June 28, 2019
7 months ago